Wood grades are based on appearance, length and size of the knots.

• Select -has the most uniform color with no knots and the longest average length of planks. Also referred to as Clear or First Grade
• Natural -has some color variation, mineral coloring and small pin knots. Also referred to as #1 Grade or Second Grade
• Rustic -has larger tight knots and the most color variation. Also referred to as #2 or Third Grade

What is a natural grade?

What is a clear grade?

What is a select grade?

What is a tavern grade?

What is a rustic grade?

What is a utility grade?

What is a cabin grade?

What is a natural grade?

What is a natural grade?

NATURAL GRADE

ALTERNATE GRADE NAME(S):•Second Grade/Millrun•#1 Common

SUMMARY: Natural Grade flooring contains distinct variations in coloration and varying wood characters. Natural grade flooring will have a slightly longer average plank length compared to Rustic grade products.

DETAILED: Specific characteristics of Natural grade flooring will vary widely by wood species; however, typically include such things as: minor imperfections in milling; imperfections in face-work which cannot be wholly removed by an ordinary method of sanding; slight variations in angle of end matching; varying wood characteristics such as spots, streaks, slightly open checks, and pin/worm holes; small splits, broken knots or knot holes; and shallow back. Natural grade pre-finished flooring will have a plank face that is free of most finishing imperfections; however, may contain a limited amount of minor blemishes including, but not limited to: light grainy surface/debris, bubbles, streaks, uncoated bevel, finish chipping, dents, or equivalent type characters. When assembled, Natural grade flooring should not exhibit gaps exceeding 0.031”or end/side over-wood(e.g. height variation between adjacent planks) exceeding 0.030”.

NOTE: This grade description is intended only to provide general characteristics of the identified wood grade, and is not all-inclusive. Specific wood characteristics and acceptance criteria may vary by wood species. A 5% allowance per box is established for pieces exhibiting one or more milling, grading, or finishing defects.